Submergence (S) is defined as the vertical distance from the free surface of the liquid pumped to the center point of entry at the pump inlet, suction piping, or formed suction intake per ANSI/HI 9.8 Rotodynamic Pumps for Pump Intake Design. The following is an excerpt regarding submergence and the reader is encouraged to refer to ANSI/HI 9.8 for full details on pump intake design.
In addition to contributing to the available Net Positive Suction Head (NPSH), a minimum submergence is also needed to prevent strong air core vortices from entering the pump or piping, such as illustrated in figure 1.E.1.
The minimum submergence required to prevent strong air core vortices is based in part on a dimensionless flow parameter, the Froud number, defined as:
(Eq. 1.E.1) $$ F_{D} = {{V} \over {(g · D)^{0.5}}} $$
where:
ANSI/HI 9.8 Rotodynamic Pumps for Pump Intake Design
Learn standard intake designs for rotodynamic pumps handling clear and solids laden fluids, the criteria beyond which an intake must be validated by physical model, and techniques to improve problem intakes.
Learn more
Consistent units must be used for V, D, and g so that FD is dimensionless. The minimum submergence (S) shall be calculated from (Hecker, G.E., 1987), where the units are those used for D. Section 9.8.6 of ANSI/HI 9.8 provides further information on the background and development of this relationship. The minimum submergence (S) is figure 1.E.2 for a vertical pump with a suction bell, and a pipe outlet with flared opening.
(Eq. 1.E.2) $$ S = D · (1 + 2.3·F_{D}) $$
Note that the minimum submergence may need to be increased to satisfy the pump NPSHR. Refer to sections Pump Principles, and Pump Curves.
Last updated on July 19th, 2024